Cartridge Cleaning Tips

Cartridge Cleaning Tips
1. Prepare the materials needed to perform the cleaning process. These materials include a tissue and cleaning fluid cartridge. The cleaning liquid can be replaced with warm water. Prepare a container as a way to clean this cartridge will involve warm water, which certainly need a container vessel. Warm water is more able to shed a layer of dry ink than water cold temperature / ordinary, so make sure the water you use does have a rather high temperature.
2. Make sure that the state of the cartridge. Remove from the printer, then wipe the bottom of the cartridge that serves to eject ink by using tissue. It aims to ascertain whether they can pull the ink cartridge properly or not. If not remove the ink at all, you should make the process how to clean the cartridge is repeated until the dry ink layer was completely lost.
3. Pour the cleaning solution or warm water to a container that has been provided. After that, insert the tip of the cartridge that had to warm water in the container. Make sure the ink dries completely lifted entirely for congestion relief ink that will come out later. Also make sure the connector interface that connects the cartridge and the printer is in protected conditions. Do this process carefully, because most major ways located at this point.
4. Use a tissue to dry cartridge. You have to dry until completely dry so as not to detract from the quality printer ink. Once the cartridge is dry and there is no dried ink stuck, reconnect the connector to the printer cartridge and ink contents as usual. The process on how to clean your pet cartridge was completed.